Sessile

Brand website

Website of La Manufacture 49 (Sessile)

Brand statement

SESSILE - Annex source of materials

RSL - Eram Group

Reduction of production waste

Recycled materials that repurpose waste

Upcycled materials that repurpose waste

Reduction of unsold goods

Recovery of unsold goods

Limited collection frequency

Repair service

Warranty service

Reduction of CO2 emissions

Use of air transport prohibited

Recycled materials reducing carbon impact

Upcycled materials reducing carbon impact

Use of renewable energy

Suppliers managing their energy consumption

Suppliers managing their water consumption

Use of sandblasting prohibited

Natural materials that limit water pollution

Organic materials that limit water pollution

Suppliers managing their water pollution

Use of chrome tanning prohibited

Use of renewable resources

Recycled materials that limit depletion of resources

Upcycled materials that limit depletion of resources

Reduction of accessories on products

Low-impact accessories

Study of risks of deforestation

By knowing its suppliers, the brand is able to control their practices and thus takes its responsibilities towards them.

Knowledge of suppliers

By working directly with its suppliers, i.e. without intermediaries, the brand has a transparent view of the working conditions in these factories.

Direct working relationships with suppliers

By committing to a minimum two-year contract with its suppliers, the brand gives them financial visibility and the ability to project themselves.

Long-term contracts with suppliers

Publication of list of suppliers

At all stages of the production chain, the working conditions are often very difficult for the workers. This is why it is important to control factories in order to verify their working conditions: forced labor, minimum age, measures against discrimination, workers’ safety. These controls, also called audits, can be carried out by external organizations or firms. They are thus a good guarantee that the minimum rights of workers are respected.

Audits of suppliers on labor-related criteria

Publication of audit results

Thanks to an anonymous alert and reporting system, workers can anonymously report problems in the factories.

Alert system at suppliers' worksites

Compliance with legal minimum wage for workers

Some countries have lower social risks due to stricter regulations.

Guarantees of origin

By owning factories along its supply chain, the brand has a transparent view of and responsibility for the working conditions of the workers in these factories.

Ownership of factories

Publication of the restricted substances list

Use of alkylphenols prohibited

Use of perfluorocarbons prohibited

Use of phthalates prohibited

Use of chromium VI prohibited

Use of halogenated flame retardants prohibited

Use of exotic leather is prohibited

Use of fur is prohibited

Use of leather requiring animal slaughter

Use of leather respecting animal welfare

Toxicity tests on components

Toxicity tests on finished products

Throughout the entire supply chain, workers may be exposed to numerous chemical substances or be required to manipulate them. Therefore, it is important to ensure that the conditions of use of these substances are respected and that they do not present risks to workers.

Audits of suppliers on toxicity criteria

Publication of toxicity audit results

Shoes

Accessory

Raw material

Weaving-Knitting

Spinning

Sewing

Finishing

The raw material production stage is the stage during which the fibers are produced, either by growing plants: natural plant fibers and artificial fibres, or by breeding: natural animal fibres, or by chemical processes: synthetics.

The spinning stage is the stage during which the raw material is transformed into yarn.

The weaving-knitting stage is the stage during which the yarn is transformed into fabric. There are two types of fabrics: - the fabric which consists in assembling threads in a regular way, arranged in two series, by crossing them perpendicularly (ex: jeans) - the knitting which consists in making loops with the thread (ex: sweater)

The finishing step is the step during which the yarns are dyed. This step also allows to "print" patterns on the fabric.

The sewing stage is the stage during which the fabric is cut and then assembled to give birth to the final garment.

Relationships with partners

Risk management

Consideration of workers' living conditions

In addition

Checks and controls on the garment

Substances used

Controversial market

No animal slaughter

Limitation of suffering

Waste

Climate change

Water

Fossil resources

Use of upcycled materials reduces textile waste by recovering production off-cuts.

%% of the brand's garments are produced from upcycled materials.

Upcycling consists of repurposing used garments and fabrics to transform them into new pieces, without the production of new material or the stages of spinning, weaving, knitting and finishing that make up the production process. The carbon impact is therefore lower than that of virgin and recycled materials.

Upcycling consists of repurposing used garments and fabrics to transform them into new pieces. This reduces the production of virgin materials and thus limits use of the Earth's fossil resources like petroleum oil.

Frequent new releases of fashion collections promote over-consumption and over-production. This leads to more textile waste each year.

Frequency of collections

The brand distributes a maximum of 2 collections per year, or does not produce a collection at all.

Unsold goods are a source of textile waste. Each year, between 10,000 and 20,000 tons of textile products are destroyed in France (the equivalent of one to two Eiffel Towers). Since January, 1st 2022, the french anti-waste bill obliges the textile companies to limit the disposal of textile products as much as possible.

The brand has a strategy for minimizing its unsold inventory.

The brand does not generate any unsold goods.

Production off-cuts result from cutting different pattern pieces from fabric, which generates a large amount of textile waste. Indeed, 20 to 30% of fabric is lost during the cutting process. To limit the quantity of cutting waste, it is possible to optimize cutting techniques or to repurpose production off-cuts.

The brand has implemented a policy of reducing its production waste.

Use of recycled materials reduces waste and disposal of textile off-cuts. Recycled materials come from different sources of waste (fabric scraps, used garments, plastic bottles, residual fibers...) and enable recovery of discarded or unused materials.

%% of the brand's garments are produced from recycled materials.

During the sewing process, fabric is cut and assembled into the final garment, a process that uses little water.

The brand only works with sewing suppliers who are committed to responsible water consumption.

During the finishing process, the fabric is treated chemically or mechanically to give it its characteristics: color, motifs, etc. This process consumes a lot of water; it is responsible for 27% of freshwater consumption in the textile industry. A large majority of finishing processes require the use of freshwater.

During the weaving or knitting process, the yarn is processed into fabric, which requires little water.

Weaving/knitting

During the spinning process, the raw material is transformed into yarn, a process that consumes a lot of water. It is responsible for 21% of freshwater consumption in the textile industry. Some spinning processes are called "wet", meaning that they require the use of large quantities of water.

The production of raw materials consumes a lot of water. It is responsible for 31% of freshwater consumption in the textile industry, in particular in the cultivation of cotton, which is very water-intensive.

Raw materials

The technique of manual or mechanical sandblasting is very water-intensive. During the sandblasting process, sand is projected at high pressure using forced air guns.

The brand does not use denim. Consequently, it does not use the technique of manual or mechanical sandblasting.

With each wash, synthetic materials release microparticles of plastic that end up in the ocean. This represents 500,000 tons of microparticles released into the oceans each year, the equivalent of 50 billion plastic bottles.

%% of the brand's garments are produced solely from natural materials; the rest of the garments contain at least one synthetic material.

Natural materials, especially cotton, require a lot of fertilizers and pesticides. When used in excess, these chemicals leach into the water table and waterways, causing algae blooms and harming other aquatic life. Organic agriculture is a production method employing cultivation and breeding practices that respect the balance of natural habitats. It prohibits use of synthetic chemicals and GMOs and limits the use of agricultural inputs.

%% of the brand's garments are produced from organically grown materials.

During sewing, the fabric is cut and assembled to create the final garment, a process that causes little water pollution.

The brand only works with sewing suppliers who are committed to reducing water pollution generated by their activity.

During the finishing process, the fabric is treated chemically or mechanically to give it its characteristics: color, motifs, etc. This stage involves many processes and a large quantity of chemicals. These substances are found in factory wastewater. The substances used in the previous stages are also found in the wastewater and must be eliminated before any treatment.

During this process, the yarn is transformed into fabric, and yarns are often coated with chemicals to facilitate the transition from yarn to fabric. These chemicals can then end up in the wastewater of finishing plants.

During the spinning process, the raw material is transformed into yarn. Use of mineral oils is necessary for winding the yarn onto spools. These oils can contain traces of products that are very harmful to health and the environment. Residues of these oils can end up in the wastewater of finishing plants.

The manufacturing processes of synthetic and artificial materials require a large amount of chemical solvents. The cultivation of natural fibers, especially cotton, also requires use of large quantities of fertilizers and pesticides, all of which contribute to the pollution of groundwater and waterways.

Chromium is a toxic heavy metal that can be released into wastewater after the tanning process. Tanning is an operation that transforms the dermis of the animal's skin into a rot-proof substance.

The brand does not prohibit chrome tanning. However, %% of its products are not tanned with chrome.

Every year the textile industry emits 1.2 billion tons of greenhouse gases, which is about 2% of global emissions. It is therefore important for brands to take action to reduce their emissions.

CO2 emissions

The brand has reduced its carbon emissions.

Air transport is the most polluting mode of transport in terms of CO2 emissions per weight transported. According to the French Ministry of the Environment, a cargo ship emits between 10 and 32.5g of CO2/ton/kilometer vs. 2200g for an airplane.

The brand prohibits air transportation of its products.

The carbon impact of recycled materials is lower than that of virgin materials. Recycled materials come from different sources of waste (fabric scraps, used clothing, plastic bottles, residual fibers...) and therefore limit the production of virgin materials with a high carbon impact. This high carbon impact is the result of agricultural and breeding methods that use large surfaces of land and significant quantities of water, as well as massive use of chemical products and/or petroleum oil for the production of artificial and synthetic fibers.

Renewable energies are inexhaustible energies. They contribute to the fight against the greenhouse effect and CO2 emissions into the atmosphere.

%% of renewable energy is used by the brand to power its offices, warehouses and stores.

During the sewing process, fabric is cut and assembled to create the final garment, which requires little energy compared to the other stages.

The brand only works with sewing suppliers who are committed to reducing their energy consumption.

During the finishing process, fabric is treated chemically or mechanically to give it its characteristics: color, motif, etc. This process requires significant electricity and especially heat. Most of the energy required is produced by non-renewable sources (coal, gas...).

Transformation of yarn into fabric requires significant energy. This energy is mostly produced by non-renewable sources (coal, gas...).

During the spinning process, the raw material is transformed into yarn, which requires significant energy. Most of the energy required is produced by non-renewable sources (coal, gas...).

The production of raw materials usually requires a large amount of energy and heat, especially for synthetic fibers.

70% of fibers produced in the world are synthetic, so derived from petroleum oil, a limited fossil resource. By opting for natural materials, the brand limits use of this resource.

%% of the brand's garments are produced from natural materials; the rest is produced from synthetic materials.

The use of recycled materials reduces the production of virgin materials. Recycled materials come from different sources of waste such as fabric scraps, used clothing, plastic bottles, residual fibers, etc. These materials, already produced and repurposed, limit use of the Earth's fossil resources like petroleum oil.

A garment guarantee proves that a brand has confidence in the quality of its products. This is a key factor in increasing the life span of products and thus reducing textile waste.

The brand does not offer a warranty service.

Repairing garments enables consumers to wear them longer and thus limits production of textile waste.

The brand offers a repair service on all its products.

Non-removable accessories (jeans buttons, rivets, eyelets...) prevent recycling of a product at the end of its life. By reducing their use, brands facilitate recycling of their products and limit the amount of textile waste.

Reduction of accessories

The brand has reduced its use of accessories on at least one product family.

Choosing recycled, upcycled or 100% natural accessories helps limit their impact.

Accessories with limited impact

The production of raw materials presents risks of deforestation. Agriculture and animal breeding require large areas of land. This is why it is important for brands to be aware of where materials are sourced and to implement measures to avoid these risks.

Study of deforestation risk

The brand has conducted a study of the risks of deforestation related to the supply of its raw materials.

The sewing process requires the work of many people. Machines do not replace human precision and experienced craftsmanship.

External audit:
     %% of the brand's sewing suppliers are audited on labor-related criteria by an external organization.

During the finishing process, workers may be exposed to large quantities of chemicals.

Brand audit:
     %% of the brand's finishing suppliers are audited on labor-related criteria by an internal brand team.

Brand audit:
     %% of the brand's weaving and knitting suppliers are audited on labor-related criteria by an internal brand team.

External audit:
     %% of the brand's spinning suppliers are audited on labor-related criteria by an external organization.

The cultivation of cotton poses many labor-related problems, such as forced labor and low wages.

Brand audit:
     %% of the brand's raw material suppliers are audited on labor-related criteria by an internal team.

At the end of the audits, the team responsible for conducting them completes a report to present the results and its observations. Publication of these results is a guarantee of transparency for the brand.

The brand does not publish the results of labor-related audits conducted at its suppliers.

The brand has implemented an alert system with all of its sewing suppliers.

The brand has implemented an alert system with all of its finishing suppliers.

The brand has not implemented an alert system for its raw material suppliers.

%% of sewing suppliers are known to the brand.

%% of finishing suppliers are known to the brand.

%% of weaving and knitting suppliers are known to the brand.

%% of spinning suppliers are known to the brand.

%% of raw material suppliers are known to the brand.

Accessories

%% of the suppliers of accessories are known to the brand. Accessories are all non-textile objects used in the production of garments. For example: zippers, buttons, rivets, snaps, fly closures...

By publishing the list of its suppliers, the brand demonstrates transparency to its consumers. This is also proof of its knowledge of its production chain.

The brand publishes the list of some of its suppliers.

%% of sewing suppliers work directly with the brand.

%% of finishing suppliers work directly with the brand.

%% of spinning suppliers work directly with the brand.

The brand guarantees that workers in its sewing factories are paid the legal minimum wage.

The brand guarantees that workers in its finishing factories are paid the legal minimum wage.

The brand guarantees that workers in its spinning factories are paid the legal minimum wage.

During the sandblasting process, sand is blasted at high pressure with forced-air guns. Workers who perform this process are exposed to silica dust that enters their bodies through their ears, noses and mouths. They can develop a disease called silicosis (an incurable lung disease) that can develop into cancer.

Chrome tanning uses many substances that are very harmful to workers. Tanning is an operation that transforms the dermis of the animal's skin into a rot-proof substance.

Prohibition of chrome tanning

%% of suppliers in the sewing process are located in countries with low labor-related risks.

%% of suppliers in the finishing process are located in countries with low labor-related risks.

%% of suppliers in the weaving and knitting process are located in countries with low labor-related risks.

%% of suppliers in the spinning process are located in countries with low labor-related risks.

%% of suppliers in the raw material production process are located in countries with low labor-related risks.

%% of the sewing factories are owned by the brand.

Substance testing checks the quantity of chemical substances present on the textile. This can be conducted during production; during the individual stages of production; after production; on the finished product; or during the transport and storage stages.

The brand conducts substance testing on its garments after production.

By publishing the restricted substances list, the brand informs the consumer about substances that can be found in their garments. This is a guarantee of transparency.

Publication of list of restricted substances

The brand does not publish the list of restricted substances in its production chain.

Alkylphenols are chemicals used in the textile industry for cleaning and dyeing. Studies have shown the toxicological potential of alkylphenols mainly as endocrine disruptors in animals as well as humans.

The brand prohibits the use of alkylphenols in its production line.

Perfluorinated compounds are used to make a textile stain- or water-repellent. Studies have shown that they affect the liver and act as endocrine disruptors, altering growth levels and sex hormones.

The brand prohibits the use of perfluorinated compounds in its production line.

Phthalates are chemical substances used in the textile industry to produced a relief effect. Studies have shown that the toxicity of phthalates is of great concern because they can interfere with the development of the testicles at an early age. The phthalates DEHP and DBP are classified as “toxic for reproduction” in Europe.

The brand prohibits the use of phthalates in its production line.

Participating brand

Environment

Waste

Reduction of production waste

Recycled materials that repurpose waste

Upcycled materials that repurpose waste

Reduction of unsold goods

Recovery of unsold goods

Limited collection frequency

Repair service

Warranty service

Climate change

Reduction of CO2 emissions

Use of air transport prohibited

Recycled materials reducing carbon impact

Upcycled materials reducing carbon impact

Use of renewable energy

Suppliers managing their energy consumption

Water

Suppliers managing their water consumption

Use of sandblasting prohibited

Natural materials that limit water pollution

Organic materials that limit water pollution

Suppliers managing their water pollution

Use of chrome tanning prohibited

Fossil resources

Use of renewable resources

Recycled materials that limit depletion of resources

Upcycled materials that limit depletion of resources

In addition

Reduction of accessories on products

Low-impact accessories

Study of risks of deforestation

Human

Relationships with partners

Knowledge of suppliers

Direct working relationships with suppliers

Long-term contracts with suppliers

Publication of list of suppliers

Risk management

Audits of suppliers on labor-related criteria

Publication of audit results

Alert system at suppliers' worksites

Consideration of workers' living conditions

Compliance with legal minimum wage for workers

Use of sandblasting prohibited

Use of chrome tanning prohibited

In addition

Guarantees of origin

Ownership of factories

Health

Checks and controls on the garment

Toxicity tests on components

Toxicity tests on finished products

Audits of suppliers on toxicity criteria

Publication of toxicity audit results

Substances used

Publication of the restricted substances list

Use of alkylphenols prohibited

Use of perfluorocarbons prohibited

Use of phthalates prohibited

Use of chromium VI prohibited

Use of halogenated flame retardants prohibited

Animal

Controversial market

Use of exotic leather is prohibited

Use of fur is prohibited

No animal slaughter

Use of leather requiring animal slaughter

Limitation of suffering

Use of leather respecting animal welfare

Production sites

Raw material

Spinning

Weaving-Knitting

Finishing

Sewing

Quality reviews about the brand Sessile

5/5

About the brand